30 En
Selecting the SCENE templates
You can create your original SCENE templates for each
SCENE button. You can refer to the preset 16 SCENE
templates to create the original SCENE templates.
■ Customizing the preset SCENE
templates
Use this feature to customize the preset SCENE templates.
1 Turn on the video monitor connected to this
unit.
2 Press and hold the desired
5
SCENE button
for 3 seconds.
The SCENE template customizing screen appears on
the video monitor.
When the SCENE template you want to customize is not
assigned to any of the
5
SCENE buttons, press
4
AMP
and then press 7l / h repeatedly to recall the desired
SCENE template on the menu screen.
3 Press
4
AMP and then
7
k / n to select the
desired parameter of the SCENE template
and then
7
l / h to select the desired value
of the selected parameter.
You can adjust the following parameters for a SCENE
template:
• INPUT: The input source component
• MODE: The active sound field programs,
STRAIGHT or DIRECT mode (see
pages 38 and 40)
• NIGHT: The night listening mode setting (see
page 41)
− SYSTEM: Keeps the current night listening
mode.
− CINEMA: Sets the night listening mode to the
CINEMA mode.
− MUSIC: Sets the night listening mode to the
MUSIC mode.
4 Press the
5
SCENE button again to confirm
the edit.
y
An asterisk mark (*) appears by the name of the original SCENE
template.
• Once the desired SCENE templates are assigned to the
corresponding
5
SCENE buttons, you may need to set the
input source of the SCENE template on the remote control. See
page 31 for details.
• You can create a customized SCENE template for each
5
SCENE button, and if you create another customized
SCENE template, this unit overwrites the old customized
SCENE template with the new one.
• The newly created template is only available for the assigned
5
SCENE button.
■ Renaming the SCENE templates
Select the name of the SCENE template at step 3
of “Customizing the preset SCENE templates”
and then press
7
ENTER.
•Press 7k / n to select the desired character.
•Press 7l / h to place “_” (underscore) under the
space or the desired character.
•Press
8
RETURN to cancel the new name.
•Press
7
ENTER to confirm the new name.
Creating your original SCENE
templates
Note
: DVD Viewing
: DVD
SCENE
INPUT
SCENE : DVD Viewing
1
SCENE template library
(Image)
Select a SCENE template
Assign to the SCENE
button
Create the original SCENE
template
1
3 seconds
Notes
1
01EN_DSP-AX463_B.book Page 30 Friday, February 1, 2008 2:09 PM
