Trouble Recovery
77
starter mechanism or top cowling after
the engine is running.
●
Do not touch the ignition coil, spark
plug wire, spark plug cap, or other elec-
trical components when starting or op-
erating the motor. You could get an
electrical shock.
EMU30290
Emergency starting engine
1. Remove the top cowling.
2. Remove the start-in-gear protection ca-
ble from the starter after removing the
clip and the screw, if the cable is
equipped.
3. Remove the starter/flywheel cover after
removing the 4 bolts. Disconnect the
leads for the warning indicator.
4. Prepare the engine for starting. For fur-
ther information, see page 31. Be sure
the engine is in neutral and that the en-
gine stop switch lanyard lock plate is at-
tached to the engine stop switch. The
main switch must be “” (on), if
equipped.
ZMU02337
ZMU02338
ZMU02649
ZMU02026
ZMU02334