Operation
37
EMU36900
Controls
Tiller handle models:
●
Turn the tiller handle fully to the left and
right to make sure operation is smooth.
●
Turn the throttle grip from the fully closed
to the fully open position. Make sure that it
turns smoothly and that it completely re-
turns to the fully closed position.
●
Look for loose or damaged connections of
the throttle and shift cables under the en-
gine cowling.
Remote control models:
●
Turn the steering wheel full-right and full-
left. Make sure operation is smooth and
unrestricted throughout the whole range
with no binding or excessive free play.
●
Operate the throttle levers several times to
make sure there is no hesitation in their
travel. Operation should be smooth over
the complete range of motion, and each le-
ver should return completely to the idle po-
sition.
●
Look for loose or damaged connections of
the throttle and shift cables under the en-
gine cowling.
EMU36481
Engine shut-off cord (lanyard)
Inspect the engine shut-off cord for damage,
such as cuts, breaks, and wear.
EMU27120
Oil
●
Check to be sure you have plenty of oil for
your trip.
EMU27151
Engine
●
Check the engine and engine mounting.
●
Look for loose or damaged fasteners.
●
Check the propeller for damage.
●
Check for oil leaks.
EMU27171
Operation after a long period of
storage
When operating the engine after a long peri-
ZMU06184
1. Cord
2. Clip
3. Engine shut-off switch
1. Cord
2. Clip
3. Engine shut-off switch
