70
Performing Device Maintenance
Maintenance and
Management
Click Maintenance on the Web interface’s main
window while logged in as an administrator to open
the
Maintenance page.
Conguration management
You can manage data recorded in the PJP-MC24
conguration le (CONFIG).
• Input Commands: You can display and change
settings using individual commands.
• Output Conguration to Window: Displays the
current PJP-MC24 conguration settings.
• Output Conguration to File: Saves the current
PJP-MC24 conguration settings to a PC.
SYSLOG management
You can manage the command history data
recorded in the PJP-MC24
SYSLOG le.
• Host Address: The IP address of the SYSLOG
server used when the PJP-MC24 sends the
SYSLOG to the server.
• DEBUG/INFO/NOTICE: You can individually
choose whether or not to save or display the
following types of SYSLOG.
• Output SYSLOG to Window: Displays the current
SYSLOG.
• Output SYSLOG to File: Saves the current
SYSLOG le to a PC.
• Delete SYSLOG: Deletes all SYSLOGs recorded
in the PJP-MC24.
History information management
You can manage all history information (conference
history, call history, and error history).
• Flash-Memory Save Time: You can set the time
when the PJP-MC24 will save its history information
to the flash memory. While the PJP-MC24 is
saving the data (for less than 100 seconds), all call
controlling stops, so set a save time when the PJP-
MC24 is unlikely to be in use.
• Save History Information: Saves history
information to the non-volatile ash memory.
• Delete History Information: Deletes all history
information including the information that has
been saved to the ash memory.
Special functions
• Switch to Maintenance Mode: Switch the PJP-
MC24 to maintenance mode before changing
setting configurations. New conference and call
requests will be ignored while the PJP-MC24 is in
the maintenance mode.
• Restart: The PJP-MC24 will cancel all calls and
restart itself.
• Recover Initial Settings: See “Initializing the
PJP-MC24” (page 84).
