55 En
TROUBLESHOOTING
ADDITIONAL
INFORMATION
■ Bluetooth™
The following messages may be displayed on the front panel display in certain situations.
Message Status/Cause Remedy
See
page
Searching... The Bluetooth Wireless Audio Receiver
and the Bluetooth component are in the
process of pairing.
—
The Bluetooth Wireless Audio Receiver
and the Bluetooth component are in the
process of establishing a connection.
—
Completed The pairing is completed.
—
Canceled The pairing is canceled.
—
Connected The connection between the Bluetooth
Wireless Audio Receiver and the
Bluetooth component is established.
—
Disconnected The Bluetooth component is
disconnected from the Bluetooth Wireless
Audio Receiver.
—
Not found The Bluetooth component is not found. During pairing:
– pairing must be performed on the Bluetooth
component and this unit simultaneously. Check if
the Bluetooth component is in pairing mode.
During connecting:
– check if the Bluetooth component is turned on.
– check if the Bluetooth component is within 10 m
(32 feet) of the Bluetooth Wireless Audio
Receiver.
—
Pairing may not have been achieved. Try pairing again.
38
