Quick start guide
13 En
INTRODUCTION
1 Turn on the video monitor connected to this
unit.
2 Press BMASTER ON/OFF inward to the ON
position on the front panel.
3 Rotate the
L
INPUT selector to set the input
source to “DVD”.
4 Start playback of the desired DVD on your
player.
5 Rotate
P
VOLUME to adjust the volume.
6 To set this unit to the standby mode, press
AMAIN ZONE ON/OFF.
y
For details about turning on/off this unit and the standby
mode, see page 31.
■ For other operations
• Optimizing the speaker parameters
automatically ☞ P. 35
• Basic playback operations ☞ P. 42
• Sound field programs ☞ P. 46
• Pure high-fidelity sounds ☞ P. 54
• FM/AM radio tuning ☞ P. 56
• XM Satellite Radio tuning ☞ P. 61
• SIRIUS Satellite Radio tuning ☞ P. 65
• iPod playback ☞ P. 73
• Playback via USB or network ☞ P. 75
• Bluetooth component playback ☞ P. 71
Step 3: Turn on the power and start
playback
Check the type of the connected speakers.
If the speakers are 6-ohm speakers, set “SPEAKER
IMP.” to “6Ω MIN” before using this unit (page 31).
You can also use 4-ohm speakers as the front speakers
(page 130).
