PERIODIC MAINTENANCE AND MINOR REPAIR
6-4
6
EAU35348
General maintenance and lubrication chart
No. ITEM CHECKS AND MAINTENANCE JOBS
INITIAL ODOMETER READINGS
1000 km
(600 mi) or
1 month or
30 hours
3000 km
(1800 mi) or
6 months or
90 hours
5000 km
(3000 mi) or
12 months or
150 hours
1 * Clutch
• Check operation.
• Adjust if necessary.
√√√
2 * Front brake
• Check operation.
• Adjust brake lever free play and replace brake shoes if
necessary.
√√√
3 * Rear brake
• Check operation.
• Adjust brake pedal free play and replace brake shoes if
necessary.
√√√
4 * Wheels
• Check runout, spoke tightness and for damage.
• Tighten spokes if necessary.
√√√
5 * Tires
• Check tread depth and for damage.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
√√
6 * Wheel bearings
• Check bearings for smooth operation.
• Replace if necessary.
√√
7 * Swingarm pivot bearings
• Check bearing assemblies for looseness.
• Moderately repack with lithium-soap-based grease.
√√
8Drive chain
• Check chain slack/alignment and condition.
• Adjust and lubricate chain with Yamaha chain and cable
lube thoroughly.
Every ride
9 * Steering bearings
• Check bearing assemblies for looseness.
• Moderately repack with lithium-soap-based grease.
√√
U5B610E0.book Page 4 Thursday, July 12, 2007 1:41 PM
