A SERVICE OF

logo

5 - 47
ENG
CLUTCH
2. Check:
pull rod bearing
Damage/wear Replace.
EAS00292
CHECKING THE PRIMARY DRIVEN GEAR
1. Check:
primary driven gear
Damage/wear Replace the primary drive
gear and clutch housing as a set.
Excessive noise during operation
Replace the primary drive gear and clutch
housing as a set.
EAS00299
INSTALLING THE CLUTCH
1. Install:
clutch boss
lock washer
clutch boss nut 1
NOTE:
Lubricate the crankshaft end threads with
engine oil.
2. Tighten:
clutch boss nut
NOTE:
_
While holding the clutch boss 2 with the uni-
versal clutch holder 3, tighten the clutch boss
nut.
3. Bend the lock washer tab along a flat side of
the nut.
Universal clutch holder
90890-04086
3
2
1
New
T
R
.
.
90 Nm (9.0 m · kg, 65 ft · lb)