Yamaha YFM25RX Manual

A SERVICE OF

next previous

8-13

1

2

3

4

5

6

7

8

9

10

11

CAUTION:

ECB00310

When removing the engine oil drain bolt, the

compression spring, oil strainer and O-ring will

fall out. Take care not to lose these parts.

NOTE:

Skip steps 5–9 if the oil filter element is not being

cleaned.

5. Remove the oil filter element cover by remov-

ing the bolts, and then remove the oil filter el-

ement.

6. Clean the oil filter element with solvent.

7. Check the O-rings for damage and replace it if

necessary.

8. Install the oil filter element and O-ring.

NOTE:

Make sure that the O-ring is properly seated.

9. Install the oil filter element cover by installing

the bolts, and then tighten them to the speci-

fied torque.

1. Oil ﬁlter element cover

2. Bolt

1

2

1. Oil ﬁlter element

2. O-ring

1

2

2