76
Electrical connection
Before connecting the machine check that the
mains voltage corresponds to the voltage given in
the technical specifications.
Check that your domestic electrical installation
can take the maximum load required, also taking
into account any other appliances in use.
Connect the machine to an earthed socket, in
accordance with current wiring regulations.
Building-in
This appliance has been designed to be built into
the kitchen furniture.
The recess should have the dimensions shown in
picture A.
Preparation and assembly of the door
The machine is originally pre-arranged for the
assembly of a door opening from right to left.
In this case it is sufficient to screw in the hinges
(1) and the counter-magnet (6) provided with the
appliance, at the right level (Fig. B).
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the above
safety precaution.
P0965
820 min
600
min.
600
596
416
176,5
818
541
195
490
160
120
90
8
515
165
A
Should the appliance power supply
cable need to be replaced, this should
be carried out by our Service Centre.
Important!
When the appliance is installed the power
supply cable must be easily accessible.
132999660 WIJ1075.qxd 16/05/01 14.25 Pagina 76 (Nero/Process Black pellicola)
