ZMU17MXL
English
16
Main requirements for the cabinet under which the microwave is to be attached:
• Thickness of the floor of the cabinet > 16mm.
• Recommended width of cabinet: 500 - 600 mm
• Depth of cabinet: min. 350 mm
• When the cabinet is fully loaded (crockery plus microwave), the floor of the cabinet must not sag by more
than 5 mm / m.
• There must be no splits or other damage to the cabinet.
• The wall mounting for the overhead cabinet must be strong and firmly secured to the wall with at least 2
screws.
• The appliance cannot be fitted below an overhead cabinet that has a strip light.
• In the case of self-assembly furniture, veneers or plastic coatings must be attached with heat-resistant
adhesive (over 75
O
C). If the veneers, plastic coatings or adhesives do not satisfy this requirement, the
coating may become distorted or peel off.
•
Important : do not fit the appliance above a cooker.
•
Adjacent tall units must be at least 10 mm away.
Building In Instructions
