10 P330i & P330m Card Printer User’s Manual 980459-001 Rev C
Installation and Setup
Installing the Print Driver Software and Setting Driver Options
d. Remove the print head protection pad. Keep the pad, as well as the other packing
material and the shipping carton, in case the printer is shipped or moved. If the
original material is lost, a replacement Shipping Kit can be ordered from Zebra;
please refer to the Media List on the Windows Drivers and User Documentation CD
supplied with this printer.
Installing the Print Driver Software and Setting Driver
Options
Printing with the P330i or P330m Printer requires the Windows Print Driver and your card
design/issuing software or printer command level programming through the printer interface.
Both models use the same Print Driver.
The printer can be used with any Windows 2000 or Windows XP computer, using the driver
provided on CD with the printer.
This section contains information on the printing of a sample card in color (using the 5-panel
color ribbon YMCKO and the Windows Print Driver).
Installing the Print Driver
To install the Print Driver automatically on all Operating Systems, use the Zebra Install
Wizard.
The Install Wizard will walk you through the appropriate installation steps. The Wizard will:
• Automatically launch when the driver CD is inserted.
Note • If updating the printer driver from a previous version, before installing the updated
print driver version, always delete the existing version from your computer.
Note • Ensure that you have administrative privileges to perform this installation, or contact
your IT department.
