Appendix
ZOOM MRS-802
144
Problems with CD-R/RW drive
■ Cannot play audio CD created with MRS-
802 on ordinary CD player
• Check whether the disc was finalized.
• Check whether the CD player is an old model.
On some old CD players, CD-R/RW discs will not play
properly as audio CDs, even if the disc was finalized.
• Discs created using CD-RW media will not be playable on
an ordinary CD player.
■ Cannot write audio data to CD-R/RW disc
• Check whether the disc was already finalized.
■ Cannot perform backup
• Check whether audio data have already been written to the
disc.
■ Cannot restore a project spanning
several discs
• Check whether the proper disc has been inserted.
• When a project backup spans several discs, insert disc
number 1. When the entire hard disk was backed up, insert
the first disc that contains data of the desired project.
Other problems
■ Connection with other equipment leads
to noise.
• Grounding using the screw on the bottom of the chassis
may be helpful.
■ Cannot save the project
• The project cannot be saved if the Protect setting is on.
Turn Protect off (→ p. 127).
■ Cannot create a new project or copy a
project
• If the display indicates "FULL", this means that no further
projects can be created. Delete projects that are no longer
needed.
■ One of the following messages is shown
when attempting to execute a command.
FULL
There is not enough free space on the CD-R/RW disc.
INSERT
DISCxxx
Insert the disc with the number xxx.
NO AUDIO
The disc in the CD-R/RW drive is not an audio disc.
NO DATA
The specified data do not exist.
NO DISC
No disc is inserted in the CD-R/RW drive.
NotBLANK
The CD-R/RW disc is not empty.
NOT CD-R
The disc inserted in the CD-R/RW drive is not a CD-R/RW
disc.
HDD FULL
There is not enough free space on the internal hard disk.
PRJ FULL
No more projects can be created on the internal hard disk.
