A SERVICE OF

logo

ES-3148 User’s Guide
63
CHAPTER 5
Initial Setup Example
This chapter shows how to set up the Switch for an example network.
5.1 Overview
The following lists the configuration steps for the initial setup:
Create a VLAN
Set port VLAN ID
Configure the Switch IP management address
5.1.1 Creating a VLAN
VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can
do this with port-based VLAN or tagged static VLAN with fixed port members. In this
example, you want to configure port 1 as a member of VLAN 2.
Figure 20 Initial Setup Network Example: VLAN
1 Click Advanced Application > VLAN > Static VLAN.
e
x
a
mple
e
xa
mple