Chapter 4 The Web Configurator
GS2200-48 User’s Guide
47
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default
administrator password. Click Management > Access Control > Logins to
display the next screen.
Figure 16 Change Administrator Login Password
Maintenance This link takes you to screens where you can perform firmware and
configuration file maintenance as well as reboot the system.
Access Control This link takes you to screens where you can change the system login
password and configure SNMP and remote management.
Diagnostic This link takes you to screens where you can view system logs and can
test port(s).
Syslog This link takes you to screens where you can setup system logs and a
system log server.
Cluster
Management
This link takes you to a screen where you can configure clustering
management and view its status.
MAC Table This link takes you to a screen where you can view the MAC address and
VLAN ID of a device attach to a port. You can also view what kind of
device it is.
IP Table This link takes you to a screen where you can view the IP addresses and
VLAN ID of a device attached to a port.You can also view what kind of
device it is.
ARP Table This link takes you to a screen where you can view the MAC address – IP
address resolution table.
Routing Table This link takes you to a screen where you can view the routing table.
Configure
Clone
This link takes you to a screen where you can copy attributes of one port
to (an)other port(s).
Table 7 Navigation Panel Links (continued)
LINK DESCRIPTION
