IES-1000 User’s Guide
6-8 G.SHDSL Commands
gshdsl7 : DEFVAL
gshdsl8 : DEFVAL
This display shows that there are two profiles (DEFVAL and debug) and that port 3 belongs to the debug profile
while ports 1, 2, 4, 5, 6, 7 and 8 belong to the DEFVAL profile.
6.6.13 Show Profile Command
Syntax:
192.168.1.1 gshdsl> show profile <name>
where
<name> = A profile name.
The show profile command displays the settings of a G.SHDSL profile.
An example is shown next.
192.168.1.1 gshdsl> show profile debug
profile name _ _ _ Cmin _ Cmax _
Debug = 192 2048
This display shows that the debug profile’s maximum transmission rate is set to 2048 Kbps and the minimum
transmission rate is set to 192 Kbps.
6.6.14 Show Profiles Command
Syntax:
192.168.1.1 gshdsl> show profiles
The show profiles command displays the settings of all the G.SHDSL profiles.
6.6.15 Set Port Command
Syntax:
192.168.1.1 gshdsl> set port <port #> <profile name>
where
<port #> =
The number of the port to which you want to assign a profile.
<profile name> =
The profile that defines the minimum and maximum transfer rates for this
port.
Enter the list ports command to view the status of all ports.
