A SERVICE OF

logo

Chapter 5 Maintenance
PMG1006-B20A User’s Guide
23
The following table describes the labels in this screen.
After you see the Firmware Upload in Progress screen, wait three minutes before logging into
the GPON Device again.
The GPON Device automatically restarts in this time causing a temporary network disconnect.
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to the
Firmware screen.
Table 10 Maintenance > Tools > Firmware
LABEL DESCRIPTION
Firmware Upgrade
Current Firmware
Version
This is the present Firmware version and the date created.
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.