VES-1000 Series Ethernet Switch
4-12 General, Switch and IP Setup
Figure 4-8 Menu 3 – TCP/IP Setup
The Menu 3 – TCP/IP Setup fields are explained in the next table:
Table 4-K LAN TCP/IP Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
TCP/IP Setup
IP Address Enter the IP address of your VES-1000 Series switch in dotted decimal
notation.
192.168.1.1
IP Subnet Mask Your VES-1000 Series switch automatically calculates the subnet mask
based on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the VES-1000 Series
switch.
255.255.255.0
Default Gateway Enter the IP address of the default outgoing gateway in dotted decimal
notation.
192.168.1.254
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your
configuration, or press [ESC] at any time to cancel.
Menu 3 – TCP/IP Setup
TCP/IP Setup:
IP Address = 192.168.1.1
IP Subnet Mask = 255.255.255.0
Default Gateway = 192.168.1.254
Press ENTER to Confirm or ESC to Cancel:
