ZyXEL VES-1616/24FA-5x Series Support Notes
All contents copyright 2008 ZyXEL Communications Corporation.
46
Enabled VLAN Stacking
Port 1 is connected to port 17 on Switch F
Port 25 is connected to port 27 on Switch C
Switch H:
Enabled VLAN, VLAN1, and egress tagging on Port 17
Port 1 is connected to another access switch in the building.
Port 17 is connected to port 2 on Switch B
Configuring Switch A, E, F and H Using the Web Configurator
On switches A, E, F and H, create a VLAN (with VID 1) which contains all the port
members. By default VLAN1 is already created for you. The setting required is to
make sure that port 17 is a member of VLAN 1 and that egress tagging is enabled
on the port.
*By default all the ports in VLAN 1 are untagged during Egress.
Configuring Switch B Using the Web Configurator
1. Use an RJ-45 Ethernet cable to connect your computer to the MGMT port on
the switch.
2. By default, the IP address on the MGMT port is 192.168.0.1/24
3. Set your computer to use a static IP address in the same subnet (for example,
192.168.0.2/24).
4. Open a web browser (such as IE) and enter http://192.168.0.1 as the URL.
5. A login screen displays. Enter “admin” (the default) as the username and “1234”
(the default) as the password.
6. After you have logged in successfully, the main screen displays as shown.
