ALCATEL Mobile Phones OT-708A Cell Phone User Manual


 
21 22
4
Calls..........................................
4.1 Making a call
Dial
In Dial Interface, dial the desired number then press the key or click “L” area in Led
area to place a call. If you make a mistake, you can delete the incorrect digits by pressing
or”R”area. If you input some digits, press or “M” area to save
the numbers. If
you did not input any digital, press
or “M” area to enter into Directory.
To access the Dial interface quickly by clicking bottom bar key “ ” in idle interface
(short press Power key to go back to idle interface)
To acess Call Log quickly by clicking “L” area or .
To hang up a call, press “cancel” or click “R” Area
To input “ +/p/w”, long press
To input “0”, short press
To exit dial Interface, press
Making an emergency call
If your phone has network coverage, dial emergency number and press the key to
make an emergency call. This works even without a SIM card and without typing the PIN
code.
(1)
Contact your network operator to check service availability.
4.2 Calling your voicemail
(1)
Your voicemail is provided by your network to avoid missing calls. It works like an
answering machine that you can consult at any time. To access your voicemail, hold
down key.
If the access number for your operator’s voicemail service does not work, dial the
number that you were given. To change this number at a later date, refer to “My
numbers” (see page 36).
To use your voicemail service from abroad, contact your network operator
before leaving.
4.3 Receiving a call
A. When you receive an incoming call, the LED will flicker to notify you.
B. When the phone is Locked, click the “unlock” button. You can then click the “Answer”
or “Reject” button to complete the operation in the touch screen. You can also click the
“L” Area to answer a call and “R” Area to “reject” a call.
C. When the phone is unlocked you can directly answer or reject a call.
If the icon is displayed, the vibrator is activated and there is no ringtone. If the
icon is displayed, the phone does not ring or vibrate.
The caller’s number is displayed if it is transmitted by the network (contact
your network operator to check service availability).
Muting the ringtone
Hold down the volume key for Mute.