Filter
Top Products
52
9
Tools ................................
9.1 Bluetooth™
(1)
Access this feature by selecting “Tools” from the main menu, then
“Bluetooth”.
To use your phone with a Bluetooth device, you need to proceed in two
steps:
- Pair and register the device to your phone,
- Select it to use hands-free communication. Only one Bluetooth audio
device (your Bluetooth headset or your Bluetooth car kit) can be
connected during the communication.
Pair and register your Bluetooth device
Activate the Bluetooth feature by selecting the “Tools\Bluetooth\
Activation\On” option.Then enter the “Device list” menu to search for
connectable Bluetooth devices and select the device you want to be
paired with in the list. If the bluetooth device has no keyboard, enter its
default password to register it with your phone. If the Bluetooth device
has keyboard/keypad,enter the same set of password on both handset and
the device to get it registered.
From the list,press the “Options” softkey to connect/disconnect,rename,
search for new devices or delete an unconnected one from the list.
Don’t forget to turn on your Bluetooth device and activate the
pairing mode while pairing it with your phone.
(1)
You are highly recommended to use SOUTHWING SH315 and i.Tech
Clip IIs Bluetooth headset, which have been tested and proved fully
compatible with OT-C701/707/717.
Change PIN2 • A protection code for certain SIM card features
(Billing/Cost/FDN, etc.) will be requested if you
attempt to access it, if the code is activated. Select
to update it with a new one (between 4 and 8
digits).
Activate phone • It is requested each time as the phone is powered
code on if this code is activated.
Change phone • Change phone password, its initial one is 1234.
code
Fixed dialed • It allows the phone to be "locked" so that it can only
number dial certain numbers, or numbers with certain
prefixes. To activate this function, PIN2 code is
mandatory.
8.11.7 Networks
Network • Depending on the option selected, the network
selection search mode will be:
•Automatic • The first network searched for is the network you
used last.
• Manual • The choice of the network connection is left up to
the user.
Preferred • List of networks to which you wish to be connected
networks in order of priority (update this list using ).
GPRS • Two modes available:
connection
(1)
•When needed • GPRS mode active depending on connection
requirements.
•Always • GPRS mode continuously active.
51
(1)
Depending on network availability.
C7_UM_GB_20-06-08 20/06/08 8:27 Page 51