Filter
Top Products
Basic Handset Operation Summary
The handset’s Battery Pack must be fully charged before its first use. See
the User Guide for full information. Place the handset into the charger for a
minimum of two hours.
If you want to Then
Remove the
Battery Pack
Press down on the latch on the Battery Pack at the back
of the handset and pull the Battery Pack towards you. The
Battery Pack releases outward.
Replace the
Battery Pack
Slide the lip of the Battery Pack into the bottom of the cavity.
Push the top of the Battery Pack until it snaps into place.
You should not have to force it into the handset.
Turn handset on Press and hold the END key until two chirps sound.
Turn handset off Press and hold the END key. One chirp will sound. If you are
in a call, hang up first, then turn off the handset.
Unlock the keypad Press the Unlk softkey, then #, to unlock the keypad.
Lock the keypad Press the Cfg softkey then NavOK, to manually lock the
keypad.
Make an internal
call
Press the START key, wait for a dial tone, then dial the
extension.
Make an external
call
Press the START key, wait for a dial tone, then dial the
number just as you would from your desk phone.
Select a line If multiple lines are available, your handset will default
to line 1. If a different line is desired, press LINE and the
number key corresponding to the desired line. You will hear
a dial tone.
Dial a number Once you hear a dial tone, press the number keys to dial
the number.
Answer a call To answer a call, press the START key and hold the earpiece
to your ear. You may also activate the speakerphone function
or use a headset.
EN