Filter
Top Products
Answer a call on a
second line
If you are on a call and hear subdued ringing, a call is
coming in on a second line. The line number on the display
will be flashing. To answer this call, put your first call on
hold and press the LINE key, then the line number of the
second call.
Answer with
headset
Press any key (other than END) to answer a call when a
headset is plugged in.
Silence while
ringing
Press the END key to silence the ring.
Change the ring
volume
Press the up/down volume buttons on the side of the
handset during ringing.
Activate or
deactivate the
speakerphone
Press the Spkr softkey and speak towards the handset.
Note that this feature may not be activated in your
communication server.
Adjust the speaker
volume
Press the volume up/down buttons on the side of the
handset during the call.
Adjust the headset
volume
Press the volume up/down buttons on the side of the
handset during the call.
Place a call on
hold
Press the More softkey and then press the Hold softkey.
Resume a held call Press the LINE key followed by the line number key.
Mute the
microphone
Press the More softkey and then press the Mute softkey.
End the call Press the END key. Be sure to do this at the end of each call
to return to the standby mode.
Change profile Press the Prof softkey in standby mode and use the Nav
keys to select a new profile. The selected profile is marked
with an asterisk (*).
Display additional
features
Press the FCN key while off hook to display additional
features that have been customized for your communication
server.
Turn on the
backlight
The backlight comes on when any key is pressed or when there
is an incoming call and stays on for 10 seconds. It turns off
after 10 seconds if another key is not pressed within that
period.
EN