Filter
Top Products
39
ACCESSORIES
Professional Handsfree Car Kit
Remove the rubber plug covering the antenna hole
on the back of the handset.
When placing the phone in the cradle, make sure
that the antenna catch is open (slider in left hand
side position). When the phone is in place, move
the slider to the right hand side for locked position.
When your phone is placed in the cradle, it will
switch on automatically with the car ignition. You
can select whether you want the telephone to
switch off automatically with the car ignition after
a delay of 1 hour or whether you want to switch it
off manually.
If you have selected
Switch off automatically
and want to switch your telephone off while the
ignition is still on, you must do so manually.
The display and keypad backlighting on your
phone will switch on and off automatically with
the car ignition. While the phone is switched on
and placed in the cradle the backlighting will
remain on continuously.
The battery will be automatically recharged as
necessary.
How to make a hands-free call
1. Enter the phone number you wish to
call or retrieve it from the phone book.
2. Press
CALL
to let the conversation take
place via the external speaker and
microphone.
3. Press
END
to end your call.
How to receive a hands-free call
1. Press
ANSWER
when the phone rings.
2. Press
END
to end your call.
By selecting
Car kit auto answer on
you can set your telephone to answer a call auto-
matically after 5 seconds. This option is only ef-
fective when the car ignition is on.
If you have selected
Any key answer on
in the Phone setup menu you can, of course,
answer the call by pressing any key.
1
3
2
GSM 908 GB 29/04/99 12:06 Side 39