Filter
Top Products
2 Installing the Telephone
Select Base Unit Location 13
User’s Guide
Select Base Unit Location
• Select a location that is not subject to excessive heat or humidity.
• Determine if the base unit will sit on your desk or be wall mounted.
• Place the base unit near a standard 120VAC outlet and within reach of a
telephone jack that is connected to the PARTNER ACS. Avoid a location
that is surrounded by metal surfaces. Make sure this outlet cannot be
turned off by a switch.
!
WARNING:
!
If the base unit is installed in a separate building from the
PARTNER ACS, you must install In-Range Out of Building (IROB)
protectors. The IROB used with the Avaya 3920 Wireless
Telephone is Module 146D (IROB Two) Dual IROB. To order an
IROB, contact your local Authorized Dealer.
• Place the base unit away from any electrical component, such as PCs,
monitors, other telephones, and the PARTNER ACS.
• If more than one unit is being installed, each base unit must be placed at
least 15 feet apart.
• Keep the base unit and handset away from sources of electrical noise, such
as motors and fluorescent lighting. For more information about installation
(including the positioning of base units and the installation of repeaters),
please refer to the Avaya 3920 Wireless Telephone Planning and
Installation Guide.
!
WARNING:
!
The Avaya 3920 Wireless Telephone handset, base unit, and
repeaters are designed for indoor use and installation. These
devices are not water proof and are not designed for use in wet or
moist environments.