Filter
Top Products
A Troubleshooting
54
User’s Guide
SEARCHING...
or
OUT OF RANGE
appears in the
handset display.
You may be at the range limit. Move back
within the system range limit (for example,
move closer to the base unit or a repeater.)
Consider installing a repeater if you
experience this condition frequently.
Make sure there is power going to the base
unit.
Check the connection between the PARTNER
ACS and the base unit.
Determine the number associated with the
telephone. Dial that telephone number from a
“wired” telephone. If you hear busy tone, the
base unit is not communicating with the
PARTNER ACS. Perform the following steps:
• Check the power.
• Verify that the telephone cord is connected
to the base unit.
• Make sure the handset is properly
registered to the base. See the Avaya 3920
Wireless Telephone Planning and
Installation Guide to register the handset
with the base unit.
• Verify that the installation guidelines have
been followed, especially for systems
where there are more than three Avaya
3920 Wireless Telephones.
ACQUIRING
LINK appears in
the handset
display.
Make sure the telephone cord is seated
properly in the base unit and in the wall jack.