Canon 70 Carrying Case User Manual


 
40
The recording time will vary according to the capacity of the memory card
you use (p. 139).
* Recording will stop after one hour of continuous recording even if the
recorded data volume has not reached 4 GB. Depending on the volume and
data writing speed of the memory card, recording may stop after one hour
of continuous recording even if the recorded data volume has not reached
4 GB.
1
FUNC. Menu * (Standard).
See Menus and Settings (p. 22).
*Default setting.
zUse the or button to select a
movie mode and press the FUNC./
SET button.
zIn ,
or
mode, you can
change the recording pixels and
frame rate (p. 42).
zSee Changing Colors (p. 60) for the procedures for using
and .
zYou can change the shooting interval (p. 43) with
selected.
zSince the period over which shooting occurs is long for the
mode, you are advised to use a fully charged battery or
an AC adapter.
2
Shoot.
zPressing the shutter button halfway automatically sets the
exposure, focus and white balance settings.
zPressing the shutter button fully starts recording video and
sound simultaneously.
zDuring shooting the recording time and [zRec] appear on
the LCD monitor. The indicator will blink green in mode.
zPressing the shutter button fully again stops recording.
Recording will stop automatically under the following circum-
stances.
- When the maximum recording time elapses
- When the built-in memory or memory card become full
zThe elapsed time from the start of recording to the finish will
display on the LCD monitor when playing back a record-
ing, but the actual playback time will be shorter than the dis-
played time.