Filter
Top Products
66
If the camera shake warning icon ( ) displays while shooting, you
can raise the ISO speed simply by pressing the button to
record at a shutter speed that avoids the effects of camera shake.
Changing the ISO Speed with One Touch
(Auto ISO Shift)
1
(Rec.) Men
u[Auto ISO
Shift] [On]/[Off]*.
See Menus and Settings (p. 23).
*Default setting.
2
Press the shutter button
halfway.
zIf appears, the button will
blink blue.
3
Press the button while holding the shut-
ter button down halfway. When the but-
ton lights up, press the shutter button all
the way.
zWith the shutter button pressed half-
way, pressing the button again
returns the ISO speed to the original
setting.
z
If you set the AE Lock (p. 49) after
raising the ISO speed, the but-
ton will continue to light blue until you
release the AE Lock, even if you release the shutter button.
z Auto ISO Shift does not work with , or , in Long
Shutter mode or with the flash.
z Depending on the shooting conditions, the camera shake
warning icon ( ) may not disappear even when the ISO
speed is elevated.