Filter
Top Products
97
Shooting
5
Shoot the image.
When you press the shutter button halfway, a number
indicating the difference between the standard exposure*
and the selected exposure appears on the LCD monitor. If
the difference is more than ±2 steps, “-2” or “+2” appears in
red.
* The standard exposure is calculated by the AE function
according to the selected metering mode.
•For functions available in this mode, see page 224.
• If you wish to change the exposure, select the shutter
speed or the aperture with the
button and change
the value using the left or right button.
• The LCD monitor’s brightness matches the selected
shutter speed and aperture value. When you select a
fast shutter speed or shoot a subject in a dark place and
set the flash to
(Red-Eye Reduction, Flash On) or
(Flash On) the LCD monitor will always light up.
•For the correlation between aperture value and shutter
speed, see page 93.