D-Link DSP-W215 Cell Phone User Manual


 
11D-Link DSP-W215 User Manual
Section 2 - Installation
Manual Setup
If you tapped Manual in Step 8, you must connect to the Smart Plug
directly. Do not close this app.
On your device, go to Settings > Wi-Fi. Select the network called
DSP-xxxx (where xxxx is the last 4 digits of the MAC address).
Note: For the exact network name (SSID), refer to the Quick Install card that
came with the product.
Tap Next to continue.
The app may ask if you wish to connect to your current Wi-Fi. Tap Yes
or No.
Enter the PIN code and tap Next.
This code is located both on the back of the Smart Plug and the Quick
Install card.