Ecom Instruments 600/601-Ex Cell Phone User Manual


 
80
First use: Inserting the SIM card and battery
Insert the SIM card into the card holder. When doing
this make sure that the tapered side of the card is fa-
cing the same way as illustrated in the diagram and/or
the plate on the mobile phone.
Install the battery by first laying down the upper side
and then pressing the area of the battery downward.
Version x.com 50x -Ex / 60x -Ex
Set up the safety lock!
Remove the battery
Proceed as follows in order to remove the battery.
Version x.com 50x -Ex / 60x -Ex:
Remove the safety lock!
- Turn over the phone. Press on the middle of the cover in the area of the cavity and lift it off.
Getting started
You are now ready to use your phone for the first time.
Switch on the phone by pressing the key. A short display appears. When you switch on your
phone for the first time, you must configure it with various settings that will remain by default
until you choose to modify them.
After entering your PIN code and the date and time, make your choice for the following settings:
Time zone, Daylight Saving Time, ring tone, volume, vibration alarm and voice mail number. If
there are contacts saved in your SIM card, you can copy them in the phone contacts memory if
desired.
v
v
u
u
Version x.com 40x / 50x -Ex Version x.com 60x -Ex
BAL x.com 401_UK.indd 80 08.01.2008 10:00:07 Uhr