Ericsson A1228dsi Cell Phone User Manual


 
Not for commercial use
Ericsson Inc.
%DVLF2SHUDWLRQV
5HGLDOLQJWKH/DVW1XPEHU<RX&DOOHG
Your telephone temporarily stores numbers you have previously
called. To view these numbers, press
<(6
from the Standby screen.
The last number you called is shown in the display. Press
or
to
scroll through the other numbers. You can place a call to a number
shown in the display by pressing
<(6
. You can delete a number from
the Outgoing Calls by pressing and holding
&/5
while the number
is shown in the display.
6XSHU'LDO
The Super Dial feature, when enabled through the SETTINGS
menu, lets you use one-touch dialing for phone numbers stored in
phonebook locations 1 through 9. To use Super Dial, press and hold
the numeric key (19) that corresponds to the phonebook location
containing the number you want to call. For example, if you want to
call the number stored in phonebook location 7, press and hold
.
Note! The first Super Dial position is reserved for quick access to voice
mail.
6SHHG'LDO
The Speed Dial feature, when enabled through the SETTINGS
menu, lets you quickly dial a phone number stored in your
phonebook. To use Speed Dial, enter the number of the phonebook
location containing the number you want to call, then press
<(6
. For
example, if you want to call the number stored in phonebook
location 12, press
, then press
and press
<(6
. Locations 2-99 can
be used to store Speed Dial phonebook locations.
0DNLQJ&UHGLW&DUG&DOOV
You can make calling card calls from your phone by doing the
following:
1 Press
0(18
from the Standby screen to access the main menu.
2 Press
to display the SETTINGS Menu.
3 Press
to display the Calling Cards submenu.
4 Select the Card Setup that you would like to use and press
<(6
.
5 Press
<(6
to select the Access Number.
6 Enter the calling card number.
7 Press
<(6
to store the number.
8 Press
12
to return to the previous screen or press
&/5
to return to
the Standby screen.
Note! Follow your calling card providers flow order for entering your
access number and verification number.
6WRSDQG3DXVH'LDOLQJ
Stop and pause dialing lets you enter groups of numbers with stops
and pauses between each group of numbers. This feature is useful
when you need to dial a phone number and then another number,
such as an access number for an answering machine or voice mail
system.
A stop causes the phone to stop transmitting numbers until you
press
<(6
. You can enter a stop in a series of digits by pressing and
holding
until is shown in the display. A pause temporarily
suspends transmitting numbers for approximately two seconds
before sending the next series. You can enter a pause in a series of
digits by pressing and holding
until is shown in the display.
'LWWR/LQGDERRN3DJH7XHVGD\2FWREHU30