Ericsson CF388 Cell Phone User Manual


 
30
To Reach Your Answering Machine.
You can call your Answering Machine at any time. If you’re calling
from your Omnipoint handset:
> Dial A123 and press F.
> When prompted, enter your PASSWORD.
> If you have any messages, your first message will
automatically begin playing.
> Each message will be saved automatically unless you delete it
by pressing
7
.
If you are calling from another phone or roaming outside the
Omnipoint coverage area, here’s how to reach your Answering
Machine.
> Dial 1, the area code and the first 3 digits of your
Omnipoint phone number, plus MAIL (6245). Example:
1-201-757-MAIL.
> When prompted, use the keypad to enter your MAILBOX
number. (This is your Omnipoint phone number, including
area code.)
> When you hear your greeting, press A.
> Enter your PASSWORD using the keypad, and proceed as
described above.
29
Listening To Your Messages.
When you reach your Answering Machine, press 1 to play your
messages.
While listening to voice messages on your Answering Machine, you
can control playback by using your handset keys. Here are the
functions you can perform:
> To back up and continue the current message, press 1.
> To replay the current message, press 11.
> To pause a few seconds, then continue playing messages,
press 2.
> To skip ahead and continue the current message, press 3.
> To skip ahead to the end of the current message,
press 33.
> To hear the Date/Time when the message was recorded,
press 5.
> To delete the message being played, press 7. If you do not
delete a message, it will be saved automatically.
> To save the message being played, press 9.
> To “un-erase” a message, press A3 before you
disconnect and the messsage will be returned to your Mailbox.
> To skip the current message and advance to the next message,
press B.
(Note: if you receive a new message while you are in your Answering
Machine, you will be notified with three short beeps.)