Filter
Top Products
40
> Press .
> Use the ARROW keys to scroll to the “Activate” setting.
> Press .
> You’ll see the message “Enter no:” on your display. Enter 1
plus your area code and the first 3 digits of your
Omnipoint phone number, plus MAIL (6245). This will
forward all your calls to your Answering Machine.
> Press . The word “Requesting” will appear on your
display. After a few seconds, “Forwarding Active” will appear
on your display. (Note: your handset will not ring until you
cancel “Forward All Calls.”)
To Cancel “Forward All Calls.”
While in the FORWARD Menu, use the ARROW key to select “Cancel
All.”
Press . The message “Please Wait” will appear on your display.
After a few seconds, you’ll see a message that Call Forwarding has
been canceled.
(For more information, see your Ericsson User’s Manual.)
USING CALL FORWARDING
39
When you can’t answer the phone or don’t want to be
interrupted, the Omnipoint Call Forwarding feature sends
incoming calls to another number.
If you don’t answer a call, or your handset is turned off or out of the
Omnipoint coverage area, Call Forwarding is preset to direct calls to
your Answering Machine automatically.
You can change your Call Forwarding setting to send calls to any
number you want. (Note: you must include 1 and the area code
when specifying a number.)
Call Forwarding can also be programmed to forward calls in various
ways:
• Forward All Calls.
• Forward if “On Busy” (when you’re on a call).
• Forward if “No Reply” (when your handset rings, but you
don’t answer).
• Forward If “Unreachable” (when your handset is off or out
of Omnipoint’s coverage area).
You can change your Call Forwarding settings at anytime. For
example, if you don’t want to be interrupted by a call, but you still
want to be able to receive pages, Answering Machine notifications,
and short e-mail messages, you can forward all incoming calls to
your Answering Machine.
Here’s how:
> Use the ARROW keys to scroll to the FORWARD Menu, then
press . The first function displayed on screen is “All
Calls.”
COYNE/40976/CC/2 10/29/96 8:43 AM Page 45