Filter
Top Products
Insert the wires from the conduit through the opening
of the junction box.
7
When making the wire connections, use the entire length of conduit provided. The conduit must not be
shortened.
Red
Black
Ground
wire
location
With the cooktop in place, open the front of the cabinet door.
Connect the red and black leads from the
cooktop conduit to the corresponding leads
in the junction box.
Red
Ground
Black
Strain
Relief
Clamp
Electrical Connections
Electronic Radiant Cooktop
Step
1
Step
2
Step
3
Step
4
GROUNDING INSTRUCTIONS
The bare ground wire in the conduit is connected to the cooktop frame. Effective January 1, 1996, the
National Electrical Code will not permit grounding through neutral. If used in new construction after
January 1, 1996 or in a mobile home, recreational vehicle or if local codes do not permit grounding
through the neutral white lead, attach the appliance grounding lead (green or copper) to the residence
grounding conductor (green or bare copper) in accordance with local codes. When connecting to a 3
conductor branch circuit, if local codes permit, connect the bare ground connector lead of the cooktop to
the branch circuit neutral (gray or white in color).
IMPORTANT: If the cooktop is being installed into a blind counter (one with no cabinet opening below),
wire connections must be made before putting the cooktop into the cutout opening.
Once the connections are made, secure wires
together using wire nuts.
Red
Black
Ground
Strain
Relief
Clamp
Step
5
NOTE: ALUMINUM WIRING
A. WARNING:
IMPROPER CONNECTION OF ALUMINUM HOUSE WIRING TO THE COPPER LEADS CAN
RESULT IN A SERIOUS PROBLEM.
B. Splice copper wires to aluminum wiring using special connectors designed and UL approved for joining
copper to aluminum and follow the manufacturer’s recommended connector procedure closely.
NOTE: Wire used, location and enclosure of splices, etc., must conform to good wiring practice and
local codes.