Filter
Top Products
Doc. No. DOC-00045694
REV.
Issued Date 2008/8/21
.
Revised Date 2008/11/6
A01
Doc. Title
Blackstone Service Manual
Page 75 of 96
HTC CONFIDENTIAL
SM-TP001-0704
HTC Corporation
6.3 Main unit inspection
Cosmetic inspection generic spec.:
1. Exposure of substratum is not acceptable for peeling. (Area 4 is included)If not exposure of substratum,
please check by SPEC of dot or scratch. (Area 4 is not included)
2. Logo may not have blurred or double print., the peeling on logo is not acceptable.
3. The character printing of main unit does not allow bad printing, scratch, dirty,
lacquered peeling, dark/white dot on it)
4 .Camera Lens: Contamination dot / foreign matter
D 0.25mm, S 3mm≦≧；Lint: L 1.5mm , W 0.2mm≦≦。
5. Accessories include Cradle; please follow Class B for inspection.
6. Main unit cosmetic inspection criteria of class D, please follow dummy class C for
inspection criteria.
GAP & STEP INSPECTIONS
Description
Accept criteria
Level
Status of main unit assembly
Defective assembly and deformed shape were not
allowed
Minor
Gap between each key and ME
parts
Can’t stuck up or no click feeling, It couldn’t
allow stuck up at pressing process
Minor
Gap between all generic ME
parts
Gap between all generic ME parts < 0.3 mm
Minor
Gap between Touch Window and
A parts
Gap between Touch Window and A parts
< 0.35 mm
Minor
Stylus
Stylus assembly protruding, loose, missing, falling
and deformed are not allowed
Minor
Step between mating parts
Step between all generic ME parts < 0.2 mm.
Reverse step do not accept
Minor
The inspective point of D area:
1. Any marks generated by scratching, grinding or colliding are acceptable except base material exposed
2. Not allow battery connector deform. The hook of battery cover also can’t allow broken and deform