Filter
Top Products
5
Using Category 5e Patch Cords, cable the LAN ports (labeled 1-8) on the DDC to the
Category 5e Voice and Data Module ports that correspond to the wallplate connections
where computers or Digital Players will be connected. Port assignments can be marked
on the DDC label for reference.
NOTE: For networks needing more than 8 LAN ports, connect a Leviton 5 or 8 port
switch to any of the eight DDC LAN ports.
WAN
LAN
Attach the power cord to the DDC and plug it into an AC outlet mounted in the bottom
of the SMC, powering the DDC. A power cord hook is located at the bottom of the DDC
to assist with cord management.
The DDC can also be powered using a Leviton Universal DC Power Supply Module using
jumper included with the DDC.
Connect computers and Digital Players to the network with Category 5e Patch Cords and
power up each device. The Digital Distribution Center auto-detects devices connected
to the network by scanning its ports for connected devices. An LED will illuminate when
the port is operational.
Remember to snap the cover on to the DDC.
STEP THREE: Configuring the DDC
From a computer connected to the network, open a web browser. Type http://DDC
into the address field of the browser and press the Enter key. This will open the Network
Media Manager application that resides on the DDC.
NOTE: The DDC must be the authoritive DNS Server (only router on the network).
DI-000-LEAPS-00A