LG Electronics 34E Cell Phone User Manual


 
aria 186/ 100/ 34E - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
19
On LKD-2N/S, 8D/S,
Conference feature can be accomplished by programming
a flexible key as CONF button (TRANS + 91).
To prevent unauthorized outside calling, DISA access or Trunk access on your station by others,
the system provides a means to lock/unlock a station by access authorization code.
Button Procedures
To register access authorization code,
Press TRANS/PGM button and dial 4 4
Dial your own 5 digits access authorization code.
Press HOLD/SAVE button.
Confirmation tone is heard.
Access Authorization Code
System Features
Procedures
Press TRANS/PGM button and dial 4 6
Press HOLD/SAVE button. (Confirmation tone is heard.)
MUTE button will flash until restored to normal.
Note : An access authorization code should be registered.
Blocking Outside Calls
Button
Range
Restoring Outside Calls
Button Procedures
Press TRANS/PGM button and dial 4 7
Dial your current access authorization code.
(Confirmation tone is heard.)
MUTE button will be extinguished.
Range
Procedures
Press SPEED button twice.
On the display, you will see:
Range
DIAL BY NAME
ICM : 1 U_SPD : 2 S_SPD : 3
Select desired type.
1 : Intercom
2 : User (Station Speed Dial)
3 : System (System Speed Dial)
Confirmation tone is heard and you will see (above):
1 : XXXX XXXX XXXXXX
2 : YYYY YYYY YYYYYY
Each station and speed dial number can be assigned to a name. When names are programmed,
you may select a speed dial number by the stored name.
Button
Using Dial By Name
Press the VOLUME button to see the next two names.
You may enter characters using the code in “Storing Dial by
Name”. The LCD will display the first two names which match
your input.
To select the name in line 1, press HOLD/SAVE button.
To select the name in line 2, dial 2 and press HOLD/SAVE
button.
The call is placed automatically.