Filter
Top Products
56
General functions
Swapping Between
Two Calls
Once the second call has been
dialed (or answered), you can
switch between the calls by
using one of the following
three methods:
1 Press the [SEND] key.
2 Press the left soft key
Options and then select
“Swap”.
3 Press Up/Down on the
navigation key.
Answering an
Incoming Call
To answer an incoming call
when the handset is ringing,
simply press the
[SEND]
key. The handset is also able
to warn you of an incoming
call while you are already on
a call. A tone sounds in the
earpiece and the display will
show that a second call is
waiting. This feature, known as
Call Waiting, is only available if
your network supports it.
If Call Waiting is turned on, you
can put the fi rst call on hold
and answer the second call by
pressing the
[SEND] key.
Rejecting an
Incoming Call
You can reject an incoming
call without answering by
simply pressing the
[END] key.
Muting the
Microphone
You can mute the microphone
during a call by pressing the
right soft key
Mute. The
handset can be unmuted by
pressing the right soft key
Unmute. When the
handset is muted, the caller
cannot hear you, but you can
still hear the caller.