Filter
Top Products
106
Settings
Handset lock (Menu 9.5.2)
You can use security code to avoid unauthorized use of the phone. If you
set phone lock to When SIM Changed, your phone will request security
code only when you change your SIM card. If you want to lock your phone
after power on, set Phone Lock to Immediately.
]
When switch on
• Off: No security code needs to be entered when switching on the
phone.
• Always on: The security code is requested whenever the phone is
switched on.
• When SIM changed: The security code is only requested if the SIM
card is changed.
]
Immediately
After entering the correct security code, the telephone becomes inactive
and locks. If you wish to disable the telephone lock feature, the correct
security code must be entered after pressing the right ‘Unlock’ key. If
your telephone is locked when switched off, it will still be locked when
switched back on.
Auto key lock (Menu 9.5.3)
When you enable Automatic key lock, keypad will be lock automatically
on an idle screen after selected seconds without any key requesting. if you
set to Off, keypad will not be locked automatically.
nn
Note
If you want to unlock your phone keypad, press the left soft key [unlock]
key and then press right key. But if you enabled Automatic key lock
before, your phone keypad will be unlock and then after selected seconds
the keypad will be lock up again automatically.