Filter
Top Products
Getting Started with Your Phone
28
Getting Started with Your Phone
How to Remove Your
microSD
™
Card
1. Uncover the slot opening and
gently press and release the
exposed edge of the
microSD
™
card to eject it.
2. Remove the microSD
™
card
from the slot and replace the
cover.
Battery Charge Level
The battery charge level is shown
at the top right of the LCD
screen. When the battery charge
level becomes low, the low battery
sensor alerts you in three ways:
sounding an audible tone, blinking
the battery icon, and displaying a
warning message. If the battery
charge level becomes exceedingly
low, the phone automatically
switches off and any function in
progress is not saved.
Turning the Phone On and
Off
Turning the Phone On
1. Install a charged battery or
connect the phone to an
external power source.
2. Press the Power/Lock Key
for about 3 seconds until the
LCD screen lights up.
Turning the Phone Off
1. Press and hold the
Power/Lock Key until the
LCD turns off.
Unlocking the Phone
After you don't use the phone
for a while, the screen and
backlight will turn off. This is to
prevent any unintentional touch
and also to conserve the battery.
Note
Do not attempt to remove the microSD
™
card while reading or writing to the card.