Filter
Top Products
16
GETTING STARTED WITH YOUR PHONE
GETTING STARTED WITH YOUR PHONE
The Battery
The phone comes with a rechargeable battery. Keep
the battery charged while not in use in order to
maximize talk and standby time. The battery charge
level is shown at the top of the LCD screen.
Installing the Battery
Insert the battery into the opening by first aligning
the bottom of the battery with the terminals near the
bottom of the phone. Align the battery cover over
the battery then slide it slightly upward until it clicks
into place.
Removing the Battery
Turn the phone off. Slide the battery downward and
remove it. Use the opening near the top of the
battery to lift the battery out.
Charging the Battery
To use the charger provided with your phone:
Warning! Use only the charger provided with the
phone. Using any charger other than the one included
with the AX8600 may damage your phone or battery.
1. Plug the end of the adapter into the phone’s
charger port and the other end into an electrical
outlet.
2. The charge time varies depending upon the
battery level.
Note
It is important to fully charge the battery before initial
use of the phone.
NOTICE
Triangle symbol should
face up.
AX8600_Eng_new.qxd 1/23/07 3:27 PM Page 16