Filter
Top Products
16
Getting Started
n Warning
The travel charger must be unplugged before you
remove the battery, otherwise, the phone could
the damaged.
3. When charging is finished, disconnect the
travel charger from the phone by pressing
on the gray tabs on both sides of the
connector while pulling the connector out.
n Note
] If your phone is powered on while charging,
you’ll see the bars in the battery indicator icon
cycle. When the battery is fully charged, the
bars in the battery indicator icon will flash on
and off.
If the battery fails to charge completely:
] After turning the phone on and off, please
attempt to recharge the battery.
] After detaching and reattaching the battery,
please attempt to recharge the battery.
Turning Your Phone On and
Off
1. Press the [END] key to swith on the
phone.
2. If the phone asks for a PIN, enter the PIN
and press the key.
The phone searches for your network and after
finding it goes to the idle screen as illustrated
below. From the idle screen, you can make or
receive a call.
n Note
The display language is preset to Automatic at
the factory. To change the language, use the
Languages menu option (Menu 9.2.6).
3. When you wish to switch the phone off,
hold down the [END] key until the
power-off image displays.
CE110_Eng_0813 8/17/07 2:25 PM Page 16