Filter
Top Products
61
Settings
Connection
Menu 9.7
GPRS Attach
(Menu 9.7.1)
If you select Power On and you are in a
network that supports packet data, the phone
registers to the GPRS network and sending
short messages will be done via GPRS. Also,
starting an active packet data connection, for
example, to send and receive e-mail, is
quicker. If you select When Needed, the
phone will use a packet data connection only
if you start an application or action that needs
it. The GPRS connection is closed after it is not
used by any application.
n Note
If there is no GPRS coverage and you have
chosen Power On, the phone will periodically try
to establish a packet data connection.
Network Profile
(Menu 9.7.2)
This menu shows the Network Profile. You can
register, delete and edit by using the Option
Menu. However, you cannot delete or edit
default configurations provided by AT&T.
Reset Network Profile
(Menu 9.7.3)
This allows Profile information to be restored
to original setting.
Flight Mode
Menu 9.8
This allows you to use only the phone’s
features that do not require the use of the
wireless network when you are in an airplane
or in places where the wireless network is
prevented.
If you set the flight mode on, the icon will
be displayed on the screen instead of the
network signal icon.
] On: You cannot make (or receive) any calls,
including emergency calls, or use other
features that require network coverage.
] Off: You can deactivate the flight mode and
restart your handset to access the network.
CE110_Eng_0813 8/17/07 2:25 PM Page 61