Filter
Top Products
17
Getting Started
3. When a phone has been charged fully,
disconnect the travel charger from the
phone by pulling the connector out.
n Notice
]If your phone is powered on while
charging, you’ll see the bars in the
battery indicator icon cycle.
When the battery is fully charged, the
bars in the battery indicator icon will
flash on and off.
If the battery fails to charge completely:
]After turning the phone on and off,
please attempt to recharge the battery.
]After detaching and reattaching the
battery, please attempt to recharge the
battery.
Turning Your Phone On
and Off
1. Hold down the [END] key until
the phone switches on.
2. If the phone asks for a PIN, enter the
PIN and the key.
The phone searches for your network
and after finding it goes to the idle
screen as illustrated below. From the idle
screen, you can make or receive a call.
n Note
The display language is preset to
Automatic at the factory. To change the
language, use the Languages menu option
(Menu 9.2.5).
3. When you wish to switch the phone
off, hold down the [END] key
until the power-off image displays.
Menu
Menu
Menu Options
Options
Options
CG180_Eng_0806 8/6/07 9:38 AM Page 17