Filter
Top Products
Change Codes
(Menu 9.5.4)
The Change codes feature allows you to
change your current password to a new
one. You must enter the current
password before you can specify a new
one.
You can change the access codes for:
Security Code, PIN1 Code, PIN2 Code
n Note
PIN: Personal Identification Number.
Connection
Menu 9.6
GPRS Attach
(Menu 9.6.1)
If you select Power On and you are in a
network that supports packet data, the
phone registers to the GPRS network and
sending short messages will be done via
GPRS. Also, starting an active packet data
connection, for example, to send and
receive e-mail, is quicker. If you select
When Needed, the phone will use a
packet data connection only if you start
an application or action that needs it. The
GPRS connection is closed after it is not
used by any application.
n Note
If there is no GPRS coverage and you have
chosen Power on, the phone will
periodically try to establish a packet data
connection.
Network Profiles
(Menu 9.6.2)
This feature sets the Profile during the
WAP and MMS connections. The Profile
menu under the Access Point feature will
display Add, Delete and Editor options,
but the reason why Activate option is not
available is because there is no way of
knowing whether WAP or MMS will be
used to activate the content.
Reset Network profile
(Menu 9.6.3)
This allows Profile information to be
restored to original setting. For example,
this option will restore the Profile that
has been deleted by the Delete All
selection from the Network Profiles
(Menu 4.4) submenu.
Settings
54
CG180_Eng_0806 8/6/07 9:39 AM Page 54