LG Electronics enV3 Cell Phone User Manual


 
21
1. Connect the cableless wall
adapter and USB data cable.
When connecting as shown
below, the LG logo on the USB
cable should face toward you.
2. Gently uncover the accessory
charging port, then plug the end
of the AC adapter into the
phone’s charger port and the
other end into an electrical
outlet.
3. The charge time varies
depending upon the battery
level.
Charging with USB
You can use your computer to
charge your phone. To be able to
charge with the USB cable, you
need to have the necessary USB
drivers installed on your PC first.
Connect one end of the USB cable
to the charging accessory port on
your phone and the other end to a
highpower USB port on your PC
(commonly located on the front
panel of the computer). It is best to
use the rear USB port when
connecting to a desktop PC. A USB
Hub should be powered by an
external power source (see Note
below).
NOTE
Low-power USB ports are not
supported, such as the USB
port on your keyboard or bus-
powered USB hub.
LG USB Driver is downloadable
from the following site:
http://www.lgmobilephones.com
> Click SUPPORT > Select a
Carrier(Verizon) > Select a
Model > Click USB Cable Driver
to download.
NOTICE
Please make sure that the
'B' Side faces up before
inserting a charger or data cable into
the charger port of your phone.