Filter
Top Products
LG GT350 | User Guide
74
wireless telephones is set at a
Specific Absorption Rate (SAR) of
1.6 watts per kilogram (1.6 W/kg).
The FCC limit is consistent with the
safety standards developed by the
Institute of Electrical and Electronic
Engineering (IEEE) and the National
Council on Radiation Protection
and Measurement. The exposure
limit takes into consideration the
body’s ability to remove heat from
the tissues that absorb energy
from the wireless phone and is
set well below levels known to
have effects. Manufacturers of
wireless phones must report the RF
exposure level for each model of
phone to the FCC. The FCC website
(http://www.fcc.gov/oet/rfsafety)
gives directions for locating the
FCC identification number on
your phone so you can find your
phone’s RF exposure level in the
online listing.
8. What has the FDA done to
measure the radiofrequency
energy coming from wireless
phones?
The Institute of Electrical and
Electronic Engineers (IEEE) is
developing a technical standard
for measuring the radiofrequency
energy (RF) exposure from
wireless phones and other wireless
handsets with the participation
and leadership of FDA scientists
and engineers. The standard,
‘Recommended Practice for
Determining the Spatial- Peak
Specific Absorption Rate (SAR)
in the Human Body Due to
Wireless Communications Devices:
Experimental Techniques,’ sets
forth the first consistent test
methodology for measuring the
rate at which RF is deposited
in the heads of wireless phone
users. The test method uses a
tissuesimulating model of the
human head. Standardized SAR
test methodology is expected to
greatly improve the consistency of
measurements made at different
laboratories on the same phone.
SAR is the measurement of the
amount of energy absorbed
in tissue, either by the whole
body or a small part of the body.
It is measured in watts/kg (or
milliwatts/g) of matter. This
measurement is used to determine
Safety Guidelines