Filter
Top Products
General Functions
30
General Functions
The handset can be unmuted by selecting Unmute.
When the handset is muted, the caller cannot hear
you, but you can still hear them.
Switching DTMF tones on during a call
To turn DTMF tones on during a call, press the left
soft key, and then select DTMF on. DTMF tones can
be turned off the same way. DTMF tones allow your
phone to make use of an automated switchboard.
Multiparty or conference calls
The multiparty or conference service provides you
with the ability to have a simultaneous conversation
with more than one caller, if your network operator
supports this feature. A multiparty call can only be
set up when you have one active call and one call on
hold, both calls having been answered. Once a
multiparty call is set up, calls can be added,
disconnected or separated (that is, removed from the
multiparty call but still connected to you) by the
person who set up the multiparty call. These options
are all available from the In-Call menu. The maximum
callers in a multiparty call are five. Once started, you
are in control of the multiparty call, and only you can
add callers to the multiparty call.
Setting up a conference call
Place one call on hold and while the active call is on,
press the left soft key and then select the
Multiparty/Join all.
Putting a conference call on hold
Press the left soft key, then select the
Multiparty/Hold all.
Activate the conference call on hold
Press the left soft key, then select the
Multiparty/Join all.
Adding calls to the conference call
To add a call to an existing conference call, press the
left soft key, then select the Multiparty/Join all.