Filter
Top Products
69
Settings
agreement with your home network, that is, the
operator whose SIM card is in your phone. The phone
lets you select another network if the phone fails to
access the selected network. If you switch off the
phone, the phone will be reset to Automatic.
]
Preferred: You can set a list of preferred networks
the handset should attempt to register with first,
before attempting to register to any other networks.
This list is created from the handset’s predefined list
of known networks.
GPRS Attach (Menu 9.8.2)
If you select Power On and you are in a network that
supports packet data, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker. If
you select When Needed, the phone will use a packet
data connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is not used by any application.
n Note If there is no GPRS coverage and you have
chosen Power On, the phone will periodically try
to establish a packet data connection.
Access Point (Menu 9.8.3)
This feature sets the Profile during the WAP connections.
Please see page 47 for further detail. The Profile menu
under the Access Point feature will display Add, Delete
and Editor options, but the reason why Activate option is
not available is that there is no way of knowing whether
WAP will be used to activate the content.
Reset Access Point (Menu 9.8.4)
This allows Profile information to be restored to
original setting. For example, this option will restore
the Profile that has been deleted by the Delete All
selection from the Access Point (Menu 3.2) submenu.
Reset Setting Menu 9.9
You can easily reset your phone to its default
configuration. To do so, proceed as follows.
1. Select the Reset Setting menu option.
2. Enter the 4-digit phone password.
n Note The password is preset to 0000.